.:: Copiers Northwest ~ New Ideas. New Solutions ~ ::.

FEATURES

With a Print/Copy speed of up to 14 PPM in Color and up to 60 PPM in black and white, the imagePRESS C1 is equipped with a 80 GB Hard Disk Drive and 1 GB RAM, providing users with exceptional productivity and reliability.

With a scanning resolution of 600 x 600 dpi, enhanced copy/print resolution of up to 1200 x 1200 dpi, the imagePRESS C1 delivers outstanding image quality, sharp text and graphics for the most graphic intensive environments.

Features a 10.4 inch full-color user interface that is comprehensive, intuitive, and smart. It provides instant status display for media and toner levels and keeps logs of everything that is done to the press.

The oil-free based V Toner is the finest pulverized toner in the market. With its small particle size of 5.5 microns (average size) and large color gamut the imagePRESS C1 delivers vivid and vibrant colors throughout the job.

The Advanced Imaging Transfer Belt technology drives improvements in both media versatility as well as image quality. The AITB uses a composite construction to print superb color on a wide range of surfaces. The soft belt surface enables excellent image transfer to uneven media.

When the V Toner and Belt Fusing Technology are combined they deliver a natural looking, gloss finish which we call Gloss Optimization. With these two combinations the amount of time the toner is exposed to the fusing unit varies. Eliminating blistering or wrinkling. And high density levels on gloss media will have a smooth finish.

The Advanced Smoothing Technology reduces jagged edges by creating smooth curves, sharp edges, and clean lines. The Graphics and text look sharper and crisper. The end result is that the job is produced at the highest level of quality. U

The Twin Red Imaging Laser will produce a true 1200 x 1200 dpi resolution that delivers higher resolution, finer halftones, clean and precise lines, and smooth gradients that contribute to crisp text and detailed graphics.

The E drum is newly designed with a new over coat layer to protect the lower layer from scratches. This new layer improves color stability and drum durability.

With the new Auto Carrier Refresh a constant supply of fresh toner is applied resulting in reliable, consistent density. It also improves uptime by eliminating frequent carrier changes.

With New Real Time Calibration the shifts in color are dramatically reduced by the constant measurement of color patches. When an unacceptable hue shift is detected, the press automatically resets itself to instantly produce the correct color. This capability ensures that the color is accurate from page-to-page.

With Automatic Press Calibration approximately 10 test patterns are printed to ensure the highest color reproduction. After the sensors read the patches the appropriate changes will be applied to ensure color accuracy.

The imagePRESS C1 supports up to 13"x19" and 17 lb. bond to 140 lb. index media through the stack bypass. Coated media can also be used through the stack bypass and Paper Deck-AA1 with the help of the heat and humidity sensors that support the Air Assist Technology.

The New Media Library allows users to edit, manage, and select media from one central location. There will be 37 custom type medias. In addition the operator may store up to 200 custom types.

The new Belt Fusing Technology improves gloss optimization. The temperature of the belt fuser is one of the lowest in the industry which helps avoid wrinkles and blistering of the media without sacrificing image quality.

SPECIFICATIONS

Main Unit Specs
	Developing System:					Dry Dual Component Developing System Auto Carrier Refresh
	Image Server Memory:					80GB HDD + 1GB RAM (Max 1.5GB)
	Max. Mailboxes Supported:					100 User Inboxes
	Scanning Resolution:					600 x 600 dpi
	Printing Resolution:					1200 x 1200 dpi (Continuous Tone)
	Halftone:					256-Level Grayscale
	Multicopy Speed
		Letter:				Up to 14 ppm (Color)/Up to 60 ppm (B/W)
	First Copy Time:					7.6 Seconds (B/W), 14.1 Seconds (Color)
	Multiple Copies:					1 to 999
	Magnification:					25% - 400% (Between 25% and 400%, in 1% Increments)
	Preset Reductions:					25%, 50%, 61%, 70%, 81%, 86%
	Preset Enlargements:					115%, 122%, 141%, 200%, 400%
	Acceptable Originals:					(MFP and Copier Model): Sheets, Books, 3-Dimensional Objects (Up to 4.4 lb./2kg)
	Maximum Original Size:					11" x 17" (Ledger)
	Standard Paper Capacity:					550 Sheets Paper Drawers x 4 (2,200 Sheets: 20 lb. Bond/80gsm) Optional: Paper Deck-AA1/AB1 (3,500 Sheets: 20 lb. Bond)
	Manual Bypass:					Stack Bypass (100 Sheets: 20 lb. Bond)
	Output Sizes
		Cassette:				Executive, Statement-R, Letter-R, Letter, Legal, 11" x 17", 12" x 18", 13" x 19"
		Bypass:				3-5/16" x 5-7/8" to 13" x 19" (100mm x 148mm to 330mm x 483mm)
	Acceptable Paper Weights
		Cassette:				17 lb. Bond to 110 lb. Index (64gsm - 209gsm) and Transparency
		Bypass:				17 lb. Bond to 140 lb. Index (64gsm - 256gsm) and Transparency
	Duplexing:					Standard Automatic Trayless Duplexing
	Warm-up Time:					11 Minutes 40 Seconds Max. After Powering On 11 Minutes 40 Seconds From Sleep Mode
	Power Requirements:					Power Source: 120V AC, 60Hz (From Main Engine) Power Plugs: 15A, 20A (Total Two Plugs for Main Unit)
	Dimensions (H x W x D):					(Printer/Reader, w/o UI): 41" x 33-3/4" x 35-3/8" (1042mm x 855mm x 898mm) (Printer/Reader, with UI): 58"x 52-3/4" x 35-3/8" (1476mm x 1339mm x 898mm)
	Weight:					(Printer/Reader): Approximately 616 lb. (280kg)
Accessories
	Feeders
			DADF (Duplexing Automatic Document Feeder)-R1*
			Acceptable Originals:			Statement to 11" x 17"
			Scanning Speed:			Up to 80 Sheets per Minute (Letter)
			Capacity:			100 Sheets
			Paper Weights:			13 lb. Bond to 80 lb. Cover (50gsm to 216gsm)
			Dimensions (H x W x D):			5-5/8" x 25-1/2" x 22-3/8" (143mm x 646mm x 569.5mm) (Excl. Document Output Tray)
			Weight:			(Excluding Output Tray): Approximately 47.3 lb. (21.5kg) Color Image Reader-H1 Image Sensor: CCD Originals: Sheets, Books, 3-Dimensional Objects Up to 4.4 lb. (2kg) Document Size: Statement to 11" x 17" (139.7mm x 139.7mm to 297mm x 432mm) Light Source: Xenon Tube Resolution: 600 x 600 dpi, 256 Gradations Productivity: Up to 80 ipm (300 dpi), Up to 50 ipm (600 dpi) Power Source: From Main Engine Dimensions (H xWx D) (Excluding Document Feeder): 4-1/8" x 28-7/8" x 23-1/2" (105mm x 732mm x 595mm) Weight (Excluding Document Feeder): Approximately 38.5 lb.(17.5kg)
	Paper Supply Options
			Side Paper Deck-AA1**
			Paper Capacity:			3,500 Sheets (20 lb. Bond)
			Paper Sizes:			Letter, Letter-R, Legal, 11"x 17", 12"x 18",13"x 19"
			Paper Weights:			Non-Coated Media: 17 lb. Bond to 140 lb. Index (64gsm to 256gsm) Coated Media: 28 lb. Bond to 140 lb. Index (106gsm to 256gsm)
			Dimensions (H x W x D):			22-1/2" x 23-5/8" x 24-1/2" (570mm x 601mm x 621mm)
			Weight:			Approximately 112.4 lb. (51kg)
			Side Paper Deck-AB1
			Paper Capacity:			3,500 Sheets (20 lb. Bond)
			Paper Sizes:			Letter
			Paper Weights:			17 lb. Bond to 110 lb. Index
			Dimensions (H x W x D):			22-5/8" x 12-7/8" x 23" (574mm x 326mm x 583mm)
			Weight:			Approximately 101.4 lb. (46kg)
	Output Options
		Finishers/Output Trays
				Finisher-AA1 and Saddle Finisher-AA2 (Optional)
				Number of Trays:		3 Trays
				Tray Capacity
					Top Tray:	Non-Collate Mode: 250 Sheets (Letter, Statement-R, Executive), 125 Sheets (Legal, Letter-R, 11" x 17", 12" x 18", 13" x 19")
					Middle Tray:	Non-Collate Mode: 1,300 Sheets (Letter, Statement-R, Executive), 650 Sheets (Legal, Letter-R, 11" x 17", 12" x 18", 13" x 19") Collate and Group Mode* 1,300 Sheets (Letter, Executive), 650 Sheets (Legal, Letter-R, 11" x 17") Staple Mode* 1,300 Sheets/100 Sets (Letter, Executive), 650 Sheets/50 Sets (Legal, Letter-R, 11" x 17")
					Lower Tray:	Non-Collate Mode: 2,450 Sheets (Letter, Executive), 1,700 Sheets (Statement-R), 650 Sheets (Legal, Letter-R, 11" x 17",12" x 18", 13" x 19") Collate and Group Mode* 1,700 Sheets (Letter, Executive), 650 Sheets (Legal, Letter-R, 11" x 17") Staple Mode* 1,300 Sheets/100 Sets (Letter, Executive), 650 Sheets/50 Sets (Legal, Letter-R, 11" x 17")
					Saddle-Stitch Tray:	1 to 5 Sheets/25 Sets; 6 to 10 Sheets/15 Sets; 11 to 15 Sheets/10 Sets
				Staple Capacity:		Corner/Double: 50 Sheets (Letter, Executive), 30 Sheets (Letter-R, Legal, 11" x 17")
				Saddle-Stitch Specifications
					Paper Sizes:	Letter-R, Legal, 11" x 17", 12" x18"
					Stapling Capacity:	15 Sheets
					Fold Type:	V-Fold
				Dimensions (H x W x D):		43-3/8" x 25-1/2" x 25-7/8" (1102mm x 646mm x 656mm)
				Weight:		Finisher-AA1: Approx. 106.9 lb. (48.5kg) Saddle Finisher-AA2: Approx. 156.5 lb. (71kg) Attachable Accessories: Puncher Unit-M1 Puncher Unit-M1 (Option for Finisher-AA1/Saddle Finisher-AA2)* Max. Paper Weight: 17 lb. Bond to 140 lb. Index (64gsm to 256gsm, 106gsm to 256gsm for Coated Media) Paper Sizes: 2-Hole: Letter-R, Legal, Executive 3-Hole: Letter, 11" x 17" Punch Method: Sequential Processing System (One Sheet at a Time) Punch Dust Stock: 3,000 Sheets Dimensions (H xWx D): 32-3/4" x 4-1/4" x 24-1/4" (833mm x 107mm x 614.8mm) Weight:** Approx. 15.9 lb. (7kg)
	Printer Boards
			Color UFRII/PCL/PS Printer Kit-P1tt
			Processor:			Canon Dual Custom Processors - Shared
			Standard Memory:			1GB (Max 1.5GB) - Shared
			Hard Disk:			80GB - Shared
			PDL Support:			UFRII, PCL 5e, PostScript 3 Emulation
			Interface Connections:			10/100 Base-T (RJ-45), USB (2.0) Network OS: Windows 98/ME/2000/XP/Server 2003/CitrixMetaframe/Mac OSX
	Send Expansion SET
			Color Universal Send Kit-G1
			Sending Method:			E-Mail, I-Fax, SMB, File Server, (FTP, IPX, WebDAV), User Inbox
			Address Book Capacity:			Max. 1,800 Destinations (Includes 200 One-Touch Buttons), Max. 5 LDAP Servers
			File Format:			File: FTP (TCP/IP), SMB (TCP/IP), NCP (IPX), WebDAV E-Mail/I-Fax: SMTP, POP3, I-FAX (Simple, Full)
			Sending Size:			File, E-mail: TIFF, JPEG, PDF, PDF (Compact)ttt PDF (Trace & Smooth)ttt, PDF (OCR)ttt, Encrypted PDFs, Digital Signature PDF (Devices, Userss) I-Fax: B/W: TIFF (MH, MR, MMR) Color: TIFF (Profile-C) Additional Optional Accessories: Universal Send PDF Advanced Universal Send PDF Security Digital User Signature PDF Kit-A1sss Web Access Software-E1n Secure Watermark-A1nn Encrypted Secure Print Software-C1n Security Expansion Board-E1 Voice Guidance Kit-A2u imageRUNNER 512MB Expansion RAM-C1 Remote Operators Software Kit-A2 imageRUNNER Security Kit-A2uu Platen Cover Type Kuuu Stack Bypass Tray-B1 Card Reader Attachment-E1 Voice Guidance Attachment-B1 Staple Cartridge-J1 Staple Cartridge-D2 Document Tray-J1 Card Reader-C1Â§ Key Switch Unit-A2 Cassette-AA1 ADF Access Handle-A1Â§Â§ imagePRESS Server Q1Â§Â§Â§ imagePRESS Server T1Â§Â§Â§ eCopy Suite imageWARE Suite Footnotes:* Power Supply Unit-S1 (for imagePRESS C1) is included. Requires power outlet independently * Up to 11" x 17" t Up to 12" x 18" tt The imageRUNNER 512MB Expansion RAM-C1 is included standard in this set item ttt When configured on the imagePRESS C1, requires Universal Send PDF Advanced Feature Set-A1 s When configured on the imagePRESS C1, requires Universal Send PDF Security Feature Set-A1 ss When configured on the imagePRESS C1, requires Digital User Signature Kit-A1 sss Requires the Color Universal Send Kit-G1 n Cannot be installed with the imagePRESS Server Q1/T1 nn The imageRUNNER 512MB Expansion RAM-C1 is required except when configured with the Color UFR II/PCL/PS Printer Kit-P1 u Voice Guidance Attachment-B1 is required for installation uu Security Expansion Board-E1 is required for installation uuu Cannot be installed w/the DADF-R1 Â§ Requires Card Reader Attachment-E1 Â§Â§ Requires DADF-R1 Â§Â§Â§ Check with your local Authorized Canon Dealer for availability Specifications are preliminary and subject to change.

ACCESSORIES

Stack Bypass Alignment Tray-B1
Maintains accurate media alignment minimizing skewed prints. This tray will be very effective for customers that often use the stack bypass to print heavy media types.

Paper Deck-AA1
The 3,500 sheet air assist paper deck can handle up to 13"x19" media from 17 lb. bond to 140 lb. index. The air assist technology utilizes heat and humidity sensors to reduce misfeeds specifically with coated media.

Paper Deck-AB1
Provides an additional 3,500 sheets of letter-sized paper, in weights ranging from 17 lb. bond to 110 lb. bond. The paper deck is equipped with an elevator tray that raises and lowers the paper to ensure smooth feeding into the paper path.

Puncher Unit-M1
Option for the Finisher-Y1 and Saddle Finisher-Y2. Places 2 or 3 holes in pages one sheet at a time.

Finisher-AA1
The finisher can accomodate up to 4,000 sheets and perform multi-position corner stapling, double-stapling for up to 50 sheets at a time, collating and offset stacking.

Saddle Finisher-AA2
The finisher can accommodate up to 4,000 sheets and perform multi-position corner stapling and double-stapling for up to 50 sheets at a time. This finisher offers saddle-stitching capabilities for up to 15 sheets or 60 imaged sides including 12"x18" paper and Vfold, collating and offset stapling.